Loading...
  • This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include minor dings on the back edge of the emitter. There may be other smaller cosmetic flaws. This is sold (kinda) un-rectified, but could be touched up with nail polish or paint / pen. I've demonstrated my favourite technique for dealing with powder coat dings, which is simply using a permanent marker dabbed into the chip to simulate carbon scoring. You get that mix of bare metal, black + the original finish. These small cosmetic niggles saves you some serious $$$. The red is difficult to capture, but it's a slightly deeper red than the images portray and is semi-translucent (see through). The images with the white background are more representative than the main image. Should note, that we consider powder coated hilts like this as 'show ponies', unless you're happy to live with the dings just to have a unique saber. Powder coat can chip under impact. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. You cannot get an RGB baselit Proffie V2.2 install from the factory. Hilt:
    • SaberTrio Vahlken Dolovite (grade B)
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • TCSS Copper based heatsink and high performance SaberTrio XP-E2 Tri Cree LED
    • Correct grade wire throughout
    • Single 16mm non-illuminated red switch. Saber runs single switch logic. Aux switch is a dummy.
    • SaberTrio factory delrin chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • SaberTrio 22mm Bass Speaker
    Included items: Includes OEM 4.2v li-ion smart charger & SaberTrio 37" heavy grade OR mid grade blade.
  • Out of stock
    This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include a couple of powder coat sections that 'could be better'. There may be other smaller cosmetic flaws.  These small cosmetic niggles saves you some serious $$$. Colour accents nod to our favourite universe bounty hunter. Should note, powder coat sections can chip under impact. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. You cannot get an RGB baselit Proffie V2.2 install from the factory. Hilt:
    • SaberTrio Vahlken Dolovite (grade B)
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • Sabertrio Copper based heatsink and high performance XP-E2 Tri Cree LED
    • Correct grade wire throughout
    • Single 16mm non-illuminated green switch. Saber runs single switch logic. Aux switch is a dummy.
    • SaberTrio factory delrin chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • SaberTrio 22mm Bass Speaker
    Included items: Includes OEM 4.2v li-ion smart charger & SaberTrio 37" heavy grade OR mid grade blade.
  • Out of stock
    This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include a minor ding on the edge of the emitter. There may be other smaller cosmetic flaws. This is sold un-rectified, but could be touched up with nail polish or paint / pen.  These small cosmetic niggles saves you some serious $$$. The red is difficult to capture, but it's a slightly deeper red than the images portray and is translucent (see through). The images with the white background are more representative than the main image. Should note, that we consider powder coated hilts like this as 'show ponies'. Powder coat can chip under impact. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:
    • SaberTrio Vahlken Dolovite (grade B)
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • ShtokCustomWorx NPXL V3 Hilt Side PCB Connector
    • Correct grade silicon wire throughout
    • SaberTrio factory delrin chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • SaberTrio 22mm Bass Speaker
    Included items: Includes OEM 4.2v li-ion smart charger & SaberTrio 37" heavy grade OR mid grade blade.
  • Out of stock
    Sale!

    Saberforge Forsaken #005 – Ready to Ship (RTS)

    Original price was: NZ$435.00.Current price is: NZ$300.00.
    This is a brand new saber expertly tweaked to take a modded Nexus Sabers Xeno3 Pixel Core + some other complimentary quality components. Includes BLADE!! It's a nice prior model Saberforge Forsaken (new) running a Xeno3Pixel board (non Bluetooth Version) in an original modded chassis, with a ShtokCustomWork short pin PCB in the emitter. It takes a standard 5V 2.1mm plug for charging. LED switch for standard menu operation. A gazillion sound fonts (30 something) & effects. Certainly not a dueller in any sense of the word (no neopixel is) but a great cosplay / play-piece. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:
    • Saberforge Forsaken (prior model)
    Install:
    • Modded Nexus Sabers (LGT) Xeno3Pixel core.
    • ShtokCustomWorx NPXL V3 Hilt Side PCB Connector
    • External 2.1mm Recharge Port (wired for a 5v USB Charge cable)
    • 12mm Illuminated Switch.
    • High capacity Nexus 18650 cell (protected)
    • This is a NON BLUETOOTH version of the board so you can't use it with the app.
    Extra Touches: USB 5v Charging cable. USB 5v Charging Brick 37" Neopixel Nexus  Blade INCLUDED
  • Out of stock
    This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include a minor blemish in the anodising on the grip, about 1/4 way up from the pommel & the tiniest of dings in the emitter. These small cosmetic niggles saves you some serious $$$. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. You cannot get an RGB baselit Proffie V2.2 install from the factory. Hilt:
    • SaberTrio Skylar (grade B)
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • Sabertrio Copper based heatsink and high performance XP-E2 Tri Cree LED
    • Correct grade wire throughout
    • Single 16mm non-illuminated gold anodised switch. Saber runs single switch logic. Aux switch is a dummy.
    • SaberTrio factory delrin chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • SaberTrio 22mm Bass Speaker
    Included items: Includes OEM 4.2v li-ion smart charger & SaberTrio 37" heavy grade OR mid grade blade.
  • This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. Hilt:
    • KR Sabers Flagship in Tactical Black
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • Sabertrio Copper based heatsink and high performance XP-E2 Tri Cree LED
    • Correct grade wire throughout
    • Single 12mm non-illuminated red anodised switch. Saber runs single switch logic.
    • Nix - 3D Printed Chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • KR Sabers 24mm Bass Speaker
    Extra Touches: Genuine slightly aged red leather. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & blade are optional.
  • Out of stock
    Complete blade 1" / 25.4mm OD 1.8mm medium-thick walled Polycarbonate tube Dual diffused with wrapped film diffuser and a milky polycarb'. Reflective disc on the base of the shouldered tip is standard
  • Complete blade 1" / 25.4mm OD 3.2mm medium-thick walled Polycarbonate tube Dual diffused with wrapped film diffuser and a milky polycarb'. Reflective disc on the base of the shouldered tip is standard
  • This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:
    • KR Sabers Flagship in Tactical Green
    Install:
    • Proffie V2.2 with approx' 8 quality, open source sound fonts.
    • ShtokCustomWorx NPXL V3 Hilt Side PCB Connector
    • Correct grade silicon wire throughout
    • Single KR Sabers 12mm Illuminated Cog Switch. Saber runs single switch logic).
    • Goth3D - 3D Printed Chassis
    • Chassis mounted kill switch
    • High capacity 18650 cell (protected)
    • KR Sabers 28mm Bass Speaker
    Extra Touches: Genuine slightly aged brown leather. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & neopixel blade are optional.
  • This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:
    • KR Sabers Flagship in Tactical Green
    Install:
    • Proffie V2.2 with approx' 12 quality open source sound fonts.
    • ShtokCustomWorx NPXL V3 Hilt Side PCB Connector
    • Correct grade silicon wire throughout
    • KR Sabers Duoswitch. A PWR & AUX tactile switch combined into one 12mm 'rocker' design.
    • 3D Printed Chassis
    • High capacity 18650 cell (unprotected)
    • KR Sabers 28mm Bass Speaker
    Extra Touches: Genuine red leather with a subtle stamped reptile design. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & neopixel blade are optional.
  • The new NeoCree LED strip to Tri Cree RGRb XPE-2 conversion module. These have been designed and produced by Warsabers and ShtokCustomWorx to conveniently allow users to seamlessly convert their neopixel lightsaber builds, that use pogo pin PCB connectors, to an RGB ‘in-hilt’ LED system.  
  • Out of stock
    20mm OD x 12mm tall.  4 ohm speaker. Louder and deeper bass than the standard 2W speaker.
  • The ShtokCustomWorx NPXL V3 PCB Lens Cover. This is the lens diffusion cover for the V3 PCB holders. Note that the holder is press fit in.
  • ShtokCustomWorx NPXL V3 LED Strip PCB Holder. This is the hilt side and for 1" emitters. It is also designed for the both the long pins AND short pins. Note that, for use with Long pins, you will need to purchase an additional lens cover. This is required for use with the long pin PCB. If you do not use a lens cover when using the long pins PCB you can risk bending or damaging your pins.
  • This is the LONG pin option. Long pins are the standard choice unless you are installing in hilts with shallow emitters (i.e. thin neck models), where you would want a short pin version. If you are not already using a chassis with a dedicated recess, you will likely need a PCB holder AND a Lens Cover (to better support the pins. Kit comes un-assembled. You need to solder your own pins into the PCB. The manual can be found here.

Title