Lightsaber & Sabers & Hilts from the Sulphur City Foundry, New Zealand

KR Sabers Flagship #001 – Ready to Ship (RTS)

NZ$764.99
This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:

KR Sabers Flagship in Tactical Green

Install:

Proffie V2.2 with approx' 12 quality open source sound fonts.

ShtokCustomWorx NPXL V3 Hilt Side PCB Connector

Correct grade silicon wire throughout

KR Sabers Duoswitch. A PWR & AUX tactile switch combined into one 12mm 'rocker' design.

3D Printed Chassis

High capacity 18650 cell (unprotected)

KR Sabers 28mm Bass Speaker

Extra Touches: Genuine red leather with a subtle stamped reptile design. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & neopixel blade are optional.
Add to cart Details
KR Sabers Flagship #002 – Ready to Ship (RTS)

NZ$758.99
This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:

KR Sabers Flagship in Tactical Green

Install:

Proffie V2.2 with approx' 8 quality, open source sound fonts.

ShtokCustomWorx NPXL V3 Hilt Side PCB Connector

Correct grade silicon wire throughout

Single KR Sabers 12mm Illuminated Cog Switch. Saber runs single switch logic).

Goth3D - 3D Printed Chassis

Chassis mounted kill switch

High capacity 18650 cell (protected)

KR Sabers 28mm Bass Speaker

Extra Touches: Genuine slightly aged brown leather. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & neopixel blade are optional.
Add to cart Details
KR Sabers Flagship #003 – Ready to Ship (RTS)

NZ$756.99
This is a brand new saber expertly installed with carefully selected, complimentary quality components. One of the first of our lovingly installed KR Sabers Ready to Ship (RTS) range. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. Hilt:

KR Sabers Flagship in Tactical Black

Install:

Proffie V2.2 with approx' 8 quality, open source sound fonts.

Sabertrio Copper based heatsink and high performance XP-E2 Tri Cree LED

Correct grade wire throughout

Single 12mm non-illuminated red anodised switch. Saber runs single switch logic.

Nix - 3D Printed Chassis

Chassis mounted kill switch

High capacity 18650 cell (protected)

KR Sabers 24mm Bass Speaker

Extra Touches: Genuine slightly aged red leather. Hand stitched with a cross-stich and backed with a small touch of adhesive to minimise any drifting. External charger (for the cell) & blade are optional.
Add to cart Details
Out of stock

Sale!

Saberforge Adamant

NZ$149.00

The hilt is machined by a professional blade smith, with tireless care given to every detail of it's construction, this saber is a work of art.

Details
Out of stock

Saberforge Coupler 01

NZ$21.99

A durable one piece design. This part can be used to combine various Adaptive Saber Parts or two Saberforge hilts together to make a staff. Available in a standard or weathered finish (standard pictured). Length: .8in (2.032cm)

Details
Out of stock

Saberforge Coupler Short Staff

NZ$39.99

A durable one piece design. This part can be used to combine various Adaptive Saber Parts or two Saberforge hilts together to make a staff. Available in a weathered finish. Length: 1.75in (4.445cm)

Details
Sale!
Saberforge Forsaken #005 – Ready to Ship (RTS)

NZ$385.00
This is a brand new saber expertly tweaked to take a modded Nexus Sabers Xeno3 Pixel Core + some other complimentary quality components. Includes BLADE!! It's a nice prior model Saberforge Forsaken (new) running a Xeno3Pixel board (non Bluetooth Version) in an original modded chassis, with a ShtokCustomWork short pin PCB in the emitter. It takes a standard 5V 2.1mm plug for charging. LED switch for standard menu operation. A gazillion sound fonts (30 something) & effects. Certainly not a dueller in any sense of the word (no neopixel is) but a great cosplay / play-piece. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is a NeoPixel install. Neopixel installs are great for show and a little light choreography (at your own risk) but not durable enough for dueling. For models more suited to blade contact / dueling, make sure to look for our RTS RGB Baselit models. Hilt:

Saberforge Forsaken (prior model)

Install:

Modded Nexus Sabers (LGT) Xeno3Pixel core.

ShtokCustomWorx NPXL V3 Hilt Side PCB Connector

External 2.1mm Recharge Port (wired for a 5v USB Charge cable)

12mm Illuminated Switch.

High capacity Nexus 18650 cell (protected)

This is a NON BLUETOOTH version of the board so you can't use it with the app.

Extra Touches: USB 5v Charging cable. USB 5v Charging Brick 37" Neopixel Nexus Blade INCLUDED
Add to cart Details
Out of stock

SaberTrio Aeryn

NZ$454.99

Sulphur City Foundry is the official SaberTrio representative for New Zealand and Australia. (Content & images courtesy of https://sabertrio.com). With the Sabertrio Aeryn, comes forth one of the most iconic saber design elements in the galaxy; the brass thin-neck. Averaging at a mere 15mm (0.6″) in diameter, it functions as the perfect choke while remaining strong enough for dueling. The grenade-inspired grip adds a whole new level of detailing and pays homage to the saber of which it drew inspiration from. The Aeryn is 285mm (11.2″) long and has an average diameter of 36mm (1.42″).

Details
Out of stock

SaberTrio Arclyte

NZ$304.99

Sulphur City Foundry is the official SaberTrio representative for New Zealand and Australia. (Content & images courtesy of https://sabertrio.com). Introducing the first illuminated saber by Sabertrio, the Arclyte. Designed to be versatile, it could be wielded with one hand, both hands or when a shorter blade is attached, as an off hand. The knurling on the hilt ensures a strong but comfortable grip and the choke allows the saber to be spun easily. The Arclyte is 260mm (10.25″) long and has an average diameter of 37mm (1.45″)

Details
Out of stock
SaberTrio Arclyte Bounty Grade B #007 – Ready to Ship (RTS)

NZ$642.96
This is a brand new saber expertly installed with carefully selected, complimentary quality components. It is a grade B hilt which means it has small cosmetic flaws. On this hilt, flaws include a couple of powder coat sections that 'could be better'. There may be other smaller cosmetic flaws. These small cosmetic niggles saves you some serious $$$. Colour accents nod to our favourite universe bounty hunter. Should note, powder coat sections can chip under impact. It is lovingly installed in-house with factory components. Rather than having to wait the install queue, Ready to Ship sabers are all prepped and ready to go! This is an RGB Baselit Install. RGB installs are more durable when it comes to blade contact / duelling. You cannot get an RGB baselit Proffie V2.2 install from the factory. Hilt:

SaberTrio Vahlken Dolovite (grade B)

Install:

Proffie V2.2 with approx' 8 quality, open source sound fonts.

Sabertrio Copper based heatsink and high performance XP-E2 Tri Cree LED

Correct grade wire throughout

Single 16mm non-illuminated green switch. Saber runs single switch logic. Aux switch is a dummy.

SaberTrio factory delrin chassis

Chassis mounted kill switch

High capacity 18650 cell (protected)

SaberTrio 22mm Bass Speaker

Included items: Includes OEM 4.2v li-ion smart charger & SaberTrio 37" heavy grade OR mid grade blade.
Details
Out of stock

SaberTrio Mirah

NZ$354.99

Sulphur City Foundry is the official SaberTrio representative for New Zealand and Australia. (Content & images courtesy of https://sabertrio.com). The Sabertrio Mirah illuminated saber, at its heart, is a duelist’s saber. With a thin, streamlined profile and light body, Mirah is as nimble as it is comfortable to wield. Accentuating it’s design is the curved slanted emitter and stylized horizontal window slits. Unique to it is the pommel’s removable end cap which allows the wielder to attach his/her own sword tassel to the saber, further personalizing it. Mirah is 264.5mm (10.4″) long which allows it to be wielded comfortably with both single hand and two hands and has an average diameter of 35mm (1.37″).

Details
Out of stock

SaberTrio Reaver

NZ$454.99

Sulphur City Foundry is the official SaberTrio representative for New Zealand and Australia. (Content & images courtesy of https://sabertrio.com). With its three distinctive claws, uniquely shaped windows and highly detailed emitter, the Sabertrio Reaver easily distinguishes itself from the rest of the pack through its aggressive, but also elaborate design. The dual chokes and large lower section provides space for a strong grip. The Reaver is 300mm (12.0″) long and has an average diameter of 36mm (1.42″).

Details
SaberTrio Saberhold Saber Bag | Dark Edition

NZ$145.00

The S3 Saberhold is a custom designed bag specifically made for carrying illuminated sabers safely and conveniently. On the outside, there is a zipper compartment meant for storing blade plugs, hex keys, spare batteries and any other small objects needed for your saber. The Saberhold can be conveniently hand-carried with the handle at the side or could be slung across the shoulder. There is a buckle on each side of the bag for the sling strap to connect to, making it adjustable for a perfect fit no matter which shoulder you prefer to carry the bag with. Moving inside the bag, there are 2 long pockets; each designed to carry a single bladeless illuminated saber hilt and prevent it from getting scratched by other contents in the bag. Multiple blades can be stored in between these pockets and the Saberhold can be extended at the bottom so that a complete saber with a blade may also fit in it. The outer shell of the Saberhold is made from Cordura nylon which is well known for its durability especially against abrasions, tears and scuffs. Right under it is a plush layer of EVA foam padding to protect the illuminated sabers that are stored inside the bag. The sling strap is a 2″ industrial grade safety harness and all zippers & adjuster buckles are YKK. The S3 Saberhold represents a joint collaboration between Sabertrio and Greenroom136. The Rebel Edition features natural brown shades accented with orange stripes that were inspired by a particular pilot uniform. It is an exclusive design to Sabertrio.

Add to cart Details
SaberTrio Saberhold Saber Bag | Rebel Edition

NZ$145.00

The S3 Saberhold is a custom designed bag specifically made for carrying illuminated sabers safely and conveniently. On the outside, there is a zipper compartment meant for storing blade plugs, hex keys, spare batteries and any other small objects needed for your saber. The Saberhold can be conveniently hand-carried with the handle at the side or could be slung across the shoulder. There is a buckle on each side of the bag for the sling strap to connect to, making it adjustable for a perfect fit no matter which shoulder you prefer to carry the bag with. Moving inside the bag, there are 2 long pockets; each designed to carry a single bladeless illuminated saber hilt and prevent it from getting scratched by other contents in the bag. Multiple blades can be stored in between these pockets and the Saberhold can be extended at the bottom so that a complete saber with a blade may also fit in it. The outer shell of the Saberhold is made from Cordura nylon which is well known for its durability especially against abrasions, tears and scuffs. Right under it is a plush layer of EVA foam padding to protect the illuminated sabers that are stored inside the bag. The sling strap is a 2″ industrial grade safety harness and all zippers & adjuster buckles are YKK. The S3 Saberhold represents a joint collaboration between Sabertrio and Greenroom136. The Rebel Edition features natural brown shades accented with orange stripes that were inspired by a particular pilot uniform. It is an exclusive design to Sabertrio.

Add to cart Details
Out of stock

SaberTrio Skylar

NZ$404.99

Sulphur City Foundry is the official SaberTrio representative for New Zealand and Australia. (Content & images courtesy of https://sabertrio.com). The Sabertrio Skylar illuminated saber is designed to be authentic and true to the elegant weapon that it was inspired from. The slanted emitter with 3 window slits on each side emanates an aggressive aura while the double chokes ensures are a very strong grip without sacrificing maneuverability. The blade is released or locked into the saber with an exposed retention screw that can be hand tightened. The Skylar is 289.5mm (11.4″) long which allows it to be wielded comfortably with two hands and has an average diameter of 36mm (1.42″).

Details

Title